Double Glazing Seal Repairs
When double-glazed window seals break this can lead to damp and mould. This could cause damage to the frame and surrounding walls and affect your health.
Fortunately, resealing is a cheaper way to repair the majority of uPVC window frames rather than replacing them. A glazier will clean the frame and glass of the window, apply a fresh bead and smooth it.
Water Leaks
Window seals are designed for water to stay out of your home. When they start to wear down, water could leak around your windows. A leaking window is not only a nuisance but can cause serious damage to the structure of your home. It is essential to recognize the issue early and get it fixed by a professional before it gets worse.
Most of the time, the cause of the windows that leak isn't in the glass itself but rather on the frame and sill. A leak in this area is the most frequent indication of a failing window seal. It could be due to damage to the seal due to weather or aging, worn out caulking or even a blocked drain that results in the accumulation of ice or water.
Water that is visible between the double-glazed panes can be a indication that the window seal has failed. This isn't as hazardous as a water leak, since the water doesn't travel far enough to reach into your home. It does mean, however that the inert gasses that are encased between your windows have escaped out. This can lower the effectiveness of the insulation in your window.
The final common sign of a damaged window seal is condensation between the panes. This may be caused by an ineffective window seal or it could be due to an unforgiving climate in your home or an issue with the glass. The condensation might not just be unpleasant, but it could cause the growth of mould and mildew in your home which is difficult and expensive to eliminate.
If you are seeing these indicators, it's the time to have an inspection of your double-glazed windows. Repairs or replacements will aid in preventing your home from water leaks, lower energy bills, and keep out draughts. It's a small expense to pay for your family's comfort and safety. Contact Thompson Creek Window to discuss your options regarding a window seal repair or replacement. Our experts are always available to help! We serve homeowners in the Mid-Atlantic.
Condensation
A broken double-glazing seal may allow water to enter the space that is insulating. This can lead to fogging or misting to the window panes.
If you see condensation in your home you should contact an expert in double glazing repair. Condensation is a sign that the vacuum seal drawn at the factory has been damaged and moisture is getting into the insulated gap.
Condensation can be caused by a range of causes and is usually caused by gaskets, sealants, or insulation in the uPVC frames of the windows. There are many options for double glazing seal repairs however it is essential that the new seals are correctly size to ensure an ideal seal and a snug fit.
Typically gaskets used to fill in the gaps between double-glazed units are made of a material such as polyurethane foam. They are designed to last a long time, however they may be damaged in time as a result of wear and tear or exposure to changes in temperatures and weather conditions.
Over time the foam will shrink or crack over time. This can lead to cracks in the seal, allowing moisture to get into the double-glazed window. This can result in condensation and a loss in energy efficiency.
Re-sealing the windows is one way to fix this problem. This is not a sure solution since it will only remove the existing condensation, and not address the underlying problems that cause the double-glazed windows to leak or form condensate.
A professional who can offer an insurance-backed guarantee must replace your windows in full. If the company fails, you're still protected by insurance. It's important to know that replacement windows must be covered by a warranty of at least 10 years.
Misting
Check that your double-glazing seals are in good working order as the autumn season draws near. Window seals that are damaged can affect the insulation properties of your windows and can also lead to dampness, mold and condensation. It is essential to address any problems with your double glazed windows as soon as you can to avoid further damage and save on energy bills.
A typical double-glazed window is constructed from two panes of glass connected by an internal space that's filled with gas. A layer of sealant on the outside covers the gap between the uPVC frame and the glass. This is crucial to maintaining the airtight seal that keeps cold and warm air from your home, saving you money on your heating bill. Unfortunately, over time these seals can be damaged due to aging, weather conditions or even poor installation. The secret ingredient that makes double glazed windows so effective can begin to degrade once this happens.
If seals that are damaged or broken are not fixed they could cause condensation and dampness which can affect your health as as the appearance of your window. double glazing window repairs and mould not only cause damage to your walls, floors and ceilings, but also cause allergens and irritants in your home that can be harmful to you and your family's health.
One of the most frequent problems that can happen to your double glazing is misting in between the panes. This happens when moisture is absorbed inside the insulated section of your windows. It isn't easy to fix without professional double-glazing repair.
DIY solutions to this problem are available, however, we recommend against them because they could be messy and damage your windows. These methods involve drilling holes into your glass unit and then using chemicals to get rid of fog and condensation. This could cause a number of problems, such as exposing your windows and units to water damage.
Professional glaziers have the expertise, tools and experience needed to effectively reseal your uPVC frames and provide you with long-lasting results. They can also give you tips on how to maintain your uPVC window to avoid any future issues.
Draughts
A draft coming through your window indicates that the sealant may have been damaged. It should be repaired or replaced. This will stop cold air getting into your home, increase the efficiency of your energy and reduce heating costs, and also make a difference to comfort levels and indoor temperature control.
It is important to keep in mind that not all drafts originate from window seals but from the gap between the frame and the bricks. In some cases it is possible to fix this by simply filling the gap with silicone caulking. If this doesn't work, you'll require the seal to be professionally repaired.
When the sealant on windows with double glazing begins to break down it allows water infiltration and can lead to dampness or even mold in some instances. This can then affect your health and could be detrimental to the property. It is essential to address any water ingress issues when you spot them. And if your windows are still covered by a guarantee, it is worth checking with the company you bought them from, as they might pay for the repairs.
It is a good idea to check whether the windows are covered by a warranty. Certain companies provide lifetime guarantees, while others only cover 10 years. If your double-glazed windows are covered by a warranty, you should consider contact the company you bought the windows from as soon as possible and providing them with the details of any issues you're experiencing. It is best to contact the company in person or by letter and email. This will ensure that everything is recorded and clear.
It is also worth noting that draughts may be caused by defective hinges rather than the absence of seals that are effective. The hinges close the window sash which is the one you open. If they are not oiling them regularly and become stiff, they may develop. This can create a gap between the sash and the frame and allow cold air in. Replacing these hinges will solve this problem without affecting the window seals.